![]() Only required when the protocol is set to Weather Underground. Be very careful to include the ? at the end otherwise nothing will work. It is very important this field is entered exactly as shown. The IP or hostname for the machine running the Docker container ![]() Select Weather Underground only if using a weather station that doesn't support Ambient Weather. Make sure to set this to Enable otherwise no data will get sent.Īmbient Weather supports more sensor data and is preferred. Set the fields to the values in the following table.Tap next through the configuration screens until you get to the Customized.Run the awnet app and connect to your weather station.It is recommended to use an iOS device, but some have found success using an Android device as well. This configuration is done through the awnet app. Your Ambient Weather station must be configured to send data to the local service. T05:59:56-07:00 Starting up T05:59:56-07:00 Connected to MQTT server T05:59:56-07:00 Listening at Setting up HomeAssistant Addon (only for non-native Docker installs)Īdd as an add-on repository. If the server starts up successfully you will see log messages like this: Start up the service by running docker-compose up in the same folder as two downloaded configuration files. ![]() env containsĬomments explaining the additional options available including username and password for connecting to the MQTT server. Must provide the address of your MQTT server, your Ambient Weather station's MACĪddress, and the timezone your station is located in. env file and specify the required information. ![]() SampleConfiguration folder contains the two files necessary The package is provided as a Docker image for ease of installation. Installation and configuration Setting up the Docker image The following Ambient Weather station models are confirmed to work: The sensor data is published with auto-discovery so they show up automatically as sensors in Home Assistant. This package listens for local data from Ambient Weather stations (such as the WS-2902C) and converts the incoming data to MQTT events. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |